Hydraulic Cylinder

Hydraulic cylinders are actuation devices that use pressurized hydraulic fluid to produce linear motion and force. They are used in a variety of power transfer applications, and can be single or double action.

Description. A versatile single-acting or double-acting, pin-mount hydraulic cylinder with a 50mm bore and 30mm diameter rod. Maximum working pressure is rated at 200 bar. The cylinder comes with 3/8″ BSP ports and mounting pin hole sizes of 25.50mm.

A plastic injection molding machine includes an injection section and a mold section. The machine operates with the following cycle: (1) plasticizing solid raw plastic, (2) closing mold and clamping, (3) injecting the plastic, and (4) opening the mold.

Custom-built hydraulic cylinders are created to address the unique and specific requirements of your application. With this hydraulic cylinder design, elements such as lifting capacity and the operating environment are prioritized, ensuring you get the best cylinder for your specific usage.

The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder.

The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder.

Four Column Hydraulic Press MachineFrame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

C-frame presses, also known as gap frame presses, offer 3-sided access to the working area to facilitate easy part loading and unloading as well as die maintenance. Beckwood offers the following C-frame press types: Standard hydraulic benchtop presses up to 55 tons. Standard servo-electric presses up to 50 tons.